ZH/JT-03 generic remote code

Everything related to protocols and IR codes
Post Reply
cocacolacoke
Posts: 2
Joined: Sat Jul 09, 2016 8:11 pm

ZH/JT-03 generic remote code

Post by cocacolacoke »

Hello,
i'm trying for some time to get the protocol for one genetic remote for my AC wall unit.
The remote is ZH/JT-03 https://www.amazon.com/GENERIC-ZH-JT-03 ... B010757672
I've seen in on a large number of different AC units.

I've used the IRrecvdump sketch in arduino, but it doesn't recognise the protocol.

i receive this:
""
Decoded Unknown(0): Value:0 (0 bits)
Raw samples(2): Gap:38496
Head: m6050 s1650

Extent=7700
Mark min:32767 max:0
Space min:32767 max:0

Decoded Unknown(0): Value:0 (0 bits)
Raw samples(100): Gap:7400
Head: m550 s1650
0:m500 s1700 1:m450 s1750 2:m500 s1700 3:m550 s1650
4:m500 s1700 5:m500 s1700 6:m450 s1700 7:m450 s700
8:m500 s650 9:m500 s600 10:m500 s650 11:m500 s600
12:m500 s650 13:m500 s600 14:m450 s700 15:m550 s600

16:m500 s1650 17:m500 s1700 18:m450 s1750 19:m500 s1700
20:m500 s1700 21:m500 s1700 22:m500 s1700 23:m450 s1750
24:m500 s600 25:m500 s650 26:m500 s600 27:m500 s650
28:m500 s600 29:m500 s650 30:m500 s650 31:m500 s600

32:m550 s600 33:m400 s1750 34:m550 s600 35:m550 s1650
36:m500 s1700 37:m400 s1800 38:m500 s1700 39:m500 s1700
40:m500 s1650 41:m450 s700 42:m500 s1700 43:m500 s600
44:m550 s600 45:m500 s650 46:m500 s600 47:m500 s1700

48:m450
Extent=82400
Mark min:400 max:550
Space min:600 max:1800

Decoded Unknown(0): Value:0 (0 bits)
Raw samples(2): Gap:7450
Head: m450 s1650

Extent=2100
Mark min:32767 max:0
Space min:32767 max:0
""

anyone can help me with this? i want to change the remote with an arduino.
I've seen that AnalysIR is suitable for this kind of analisys, but i don't know how to use it.
I can purchase it, but i would not know how to use it.

I appreciate any sugestion.
User avatar
AnalysIR
Site Admin
Posts: 776
Joined: Sat Aug 31, 2013 3:51 pm
Location: Dublin, Ireland
Contact:

Re: ZH/JT-03 generic remote code

Post by AnalysIR »

Unfrtunately, you have not capture the full signal in the one you posted.

Try this, from our blog:
https://www.analysir.com/blog/2014/03/1 ... s-arduino/

AnalysIR can also capture these signals & generate the code to send them with IRremote or IRLib etc. I can lso correct the timings to improve performance/range.
cocacolacoke
Posts: 2
Joined: Sat Jul 09, 2016 8:11 pm

Re: ZH/JT-03 generic remote code

Post by cocacolacoke »

Hello,
thanks for your feedback.
here is the on/of button pushed 6 times, and the recorded string:

Raw: (197) 6128, -7352, 588, -1604, 592, -1604, 592, -1604, 592, -1600, 592, -1608, 528, -1668, 576, -1636, 564, -1632, 592, -532, 588, -540, 584, -540, 528, -612, 592, -532, 588, -536, 588, -540, 528, -612, 592, -1604, 588, -1608, 588, -1600, 596, -1600, 592, -1608, 528, -1668, 552, -1660, 588, -1604, 592, -532, 592, -536, 532, -612, 584, -540, 588, -536, 588, -532, 532, -616, 588, -532, 592, -1604, 588, -1604, 588, -1608, 528, -1684, 592, -1600, 592, -1604, 588, -1608, 588, -1604, 588, -560, 584, -532, 596, -528, 592, -536, 528, -612, 592, -532, 592, -532, 592, -560, 552, -1632, 596, -1596, 596, -1600, 588, -1608, 532, -612, 584, -536, 592, -532, 588, -1604, 536, -612, 588, -532, 592, -536, 584, -560, 584, -1604, 592, -1596, 596, -1600, 592, -536, 576, -564, 592, -1600, 596, -1600, 588, -556, 508, -1684, 588, -536, 588, -1604, 588, -1604, 532, -1684, 588, -532, 592, -536, 584, -1604, 580, -564, 592, -1596, 596, -528, 536, -612, 588, -532, 592, -1600, 592, -536, 576, -1632, 592, -532, 592, -1600, 592, -556, 588, -532, 592, -1596, 596, -532, 552, -1660, 592, -528, 592, -1600, 588, -556, 592, -1600, 596, -1596, 592, -7340, 592,

Press the button on the remote now - once only

Raw: (197) 6128, -7348, 592, -1596, 624, -1572, 596, -1600, 596, -1600, 536, -1656, 580, -1640, 588, -1604, 620, -1572, 596, -528, 596, -532, 576, -572, 588, -528, 596, -528, 592, -560, 576, -544, 596, -524, 596, -1596, 624, -1576, 532, -1664, 604, -1608, 592, -1596, 624, -1572, 592, -1600, 596, -1600, 536, -608, 592, -532, 596, -528, 592, -532, 604, -540, 620, -504, 620, -504, 592, -556, 584, -1604, 596, -1596, 620, -1572, 596, -1600, 532, -1664, 612, -1600, 592, -1600, 596, -1596, 620, -508, 604, -540, 592, -528, 596, -528, 616, -512, 608, -532, 592, -532, 592, -532, 604, -1608, 592, -532, 616, -1572, 620, -1572, 532, -616, 592, -528, 592, -532, 592, -1620, 588, -536, 592, -1600, 596, -532, 528, -612, 620, -1572, 596, -1592, 600, -1596, 580, -564, 596, -524, 596, -1596, 596, -1600, 608, -536, 592, -1600, 592, -532, 532, -1660, 612, -1596, 624, -1568, 596, -532, 576, -568, 592, -1596, 596, -532, 532, -1660, 604, -536, 596, -528, 616, -532, 556, -1632, 592, -532, 592, -1596, 592, -556, 588, -1600, 592, -532, 592, -552, 584, -1608, 620, -500, 592, -1604, 572, -568, 596, -1592, 600, -524, 532, -1664, 608, -1600, 596, -7364, 592,

Press the button on the remote now - once only

Raw: (197) 6148, -7328, 576, -1640, 592, -1600, 596, -1600, 592, -1600, 592, -1600, 596, -1600, 536, -1660, 608, -1608, 592, -532, 620, -500, 596, -532, 576, -568, 588, -532, 596, -528, 592, -556, 556, -564, 596, -1600, 592, -1600, 596, -1600, 616, -1580, 532, -1680, 588, -1604, 596, -1600, 592, -1596, 600, -532, 528, -616, 588, -532, 596, -528, 616, -532, 580, -540, 592, -528, 596, -532, 532, -1664, 604, -1604, 596, -1596, 624, -1572, 616, -1572, 536, -1668, 600, -1604, 624, -1572, 592, -532, 592, -552, 588, -532, 596, -528, 592, -532, 604, -540, 592, -532, 592, -532, 532, -1660, 604, -1608, 592, -1600, 596, -1596, 596, -552, 584, -536, 596, -528, 592, -1600, 536, -608, 592, -532, 592, -532, 592, -552, 584, -1608, 592, -1600, 592, -1600, 592, -556, 584, -536, 592, -1596, 592, -1600, 592, -536, 612, -1596, 596, -528, 592, -1604, 532, -1680, 588, -1604, 620, -500, 596, -552, 584, -1604, 620, -504, 592, -1596, 536, -616, 584, -536, 592, -532, 528, -1660, 612, -536, 592, -1592, 596, -532, 532, -1680, 588, -532, 596, -532, 588, -1604, 608, -532, 596, -1592, 600, -552, 584, -1600, 600, -524, 620, -1572, 532, -1664, 612, -7336, 592,

Press the button on the remote now - once only

Raw: (197) 6144, -7332, 608, -1604, 592, -1604, 596, -1596, 592, -1600, 596, -1600, 596, -1600, 536, -1656, 612, -1604, 592, -532, 600, -524, 592, -532, 604, -540, 592, -532, 592, -532, 616, -532, 584, -536, 596, -1600, 592, -1596, 600, -1596, 536, -1660, 604, -1612, 588, -1604, 596, -1600, 616, -1572, 600, -552, 508, -612, 620, -500, 600, -524, 592, -536, 608, -532, 600, -524, 596, -528, 532, -1664, 608, -1604, 592, -1600, 596, -1596, 596, -1600, 564, -1628, 608, -1608, 620, -1572, 596, -528, 592, -556, 584, -536, 592, -532, 616, -508, 528, -616, 612, -508, 596, -528, 616, -1576, 604, -544, 616, -1572, 592, -1600, 596, -552, 584, -536, 596, -528, 592, -1596, 536, -616, 584, -1604, 592, -532, 616, -508, 604, -1608, 592, -1600, 596, -1592, 596, -532, 608, -536, 596, -1592, 596, -1600, 592, -552, 588, -1604, 592, -528, 596, -1600, 532, -1680, 616, -1576, 596, -524, 620, -504, 608, -1604, 592, -532, 620, -1572, 532, -596, 608, -532, 592, -528, 592, -1604, 604, -536, 596, -1596, 596, -528, 532, -1680, 592, -532, 592, -528, 532, -1660, 608, -536, 620, -1568, 620, -508, 604, -1608, 616, -508, 592, -1596, 564, -1648, 588, -7344, 620,

Press the button on the remote now - once only

Raw: (197) 6128, -7344, 588, -1604, 596, -1600, 596, -1596, 596, -1596, 600, -1596, 596, -1600, 580, -1636, 592, -1604, 592, -532, 592, -532, 532, -616, 584, -536, 596, -528, 592, -532, 532, -612, 588, -536, 596, -1592, 624, -1572, 596, -1600, 536, -1660, 608, -1608, 592, -1600, 596, -1592, 624, -1572, 596, -552, 560, -564, 592, -528, 596, -532, 532, -612, 588, -532, 596, -528, 592, -532, 604, -1596, 604, -1604, 592, -1600, 596, -1596, 620, -1572, 580, -1616, 608, -1604, 596, -1596, 596, -532, 532, -612, 592, -528, 596, -528, 592, -532, 604, -540, 592, -532, 592, -532, 532, -1664, 604, -1604, 596, -1592, 600, -1596, 620, -532, 584, -532, 620, -500, 596, -1600, 532, -612, 588, -536, 620, -500, 596, -552, 584, -1608, 592, -1600, 592, -1596, 592, -560, 584, -532, 596, -1596, 596, -1600, 592, -536, 604, -1604, 592, -528, 596, -1600, 532, -1660, 612, -1596, 600, -524, 620, -532, 584, -1600, 600, -524, 620, -1572, 616, -532, 584, -536, 620, -504, 588, -1600, 580, -568, 592, -1592, 600, -524, 532, -1668, 608, -528, 596, -528, 592, -1604, 600, -540, 620, -1572, 620, -532, 504, -1680, 592, -528, 596, -1600, 532, -1664, 604, -7368, 592,

Press the button on the remote now - once only

Raw: (197) 6124, -7348, 620, -1572, 600, -1596, 592, -1604, 532, -1664, 608, -1608, 592, -1600, 596, -1600, 592, -1600, 620, -504, 532, -616, 588, -536, 592, -528, 620, -504, 532, -616, 592, -532, 592, -528, 596, -1596, 536, -1660, 612, -1604, 592, -1600, 596, -1600, 620, -1572, 596, -1596, 536, -1660, 608, -540, 616, -504, 596, -532, 532, -612, 588, -532, 596, -524, 596, -556, 584, -536, 592, -1596, 596, -1600, 592, -1604, 532, -1664, 576, -1636, 592, -1596, 600, -1596, 592, -1600, 536, -592, 608, -532, 592, -536, 616, -528, 508, -612, 592, -528, 596, -532, 588, -536, 612, -1596, 596, -528, 592, -1604, 532, -1664, 604, -536, 592, -532, 592, -552, 512, -1680, 592, -532, 592, -1600, 616, -532, 580, -540, 592, -1600, 616, -1572, 596, -1600, 608, -532, 600, -524, 596, -1596, 536, -1660, 608, -536, 592, -1596, 596, -532, 532, -1664, 604, -1604, 592, -1596, 596, -556, 504, -616, 592, -1596, 596, -528, 596, -1596, 612, -536, 620, -496, 596, -528, 608, -1608, 592, -528, 596, -1596, 532, -616, 588, -1600, 592, -532, 592, -552, 560, -1628, 596, -528, 592, -1600, 532, -612, 592, -1600, 592, -532, 592, -1600, 608, -1604, 592, -7364, 592,

Press the button on the remote now - once only
Press the button on the remote now - once only

i'm just searching a method to find what's the code for each button, for me to replicate it using arduino.
thanks.
User avatar
AnalysIR
Site Admin
Posts: 776
Joined: Sat Aug 31, 2013 3:51 pm
Location: Dublin, Ireland
Contact:

Re: ZH/JT-03 generic remote code

Post by AnalysIR »

I have imported your first posted signal successfully into AnalysIR and it decodes as a Chigo 96 bit AC signal. (your model may be different because they are OEM'd a lot)
see attached image below.


You will find lots of examples of how to send AC signals via our blog & in this forum:
https://www.analysir.com/blog/tag/air-conditioner/
You do not have the required permissions to view the files attached to this post.
Post Reply