LG AC RAW code
Posted: Fri Nov 01, 2019 8:14 am
Hi,
I have a LG AC that i would like to turn on and off with an arduino mega.
My original remote is in Sweden, here i have only a universal Remote that woks with my LG AC (tested).
I received these RAW Codes from my arduino with your sketch.
ON
Raw: (59) 8368, -4156, 552, -1528, 552, -476, 548, -484, 548, -516, 524, -1528, 552, -476, 548, -484, 552, -492, 552, -484, 552, -484, 552, -476, 548, -484, 552, -484, 548, -1528, 556, -472, 552, -492, 552, -484, 548, -480, 548, -1520, 548, -1528, 552, -484, 552, -476, 552, -1524, 552, -480, 548, -1524, 552, -484, 548, -508, 524, -1516, 552,
and for OFF
Raw: (59) 8340, -4192, 552, -1524, 556, -472, 556, -480, 520, -544, 492, -1560, 548, -480, 548, -484, 552, -484, 548, -1520, 528, -1552, 528, -508, 528, -508, 524, -504, 524, -512, 520, -524, 520, -516, 524, -512, 520, -504, 524, -512, 492, -552, 520, -508, 520, -1544, 524, -520, 516, -1556, 524, -508, 520, -516, 516, -516, 520, -1560, 516,
Now I would like to adjust my RAW codes to LG28AC Rules in analysir.
Marks and spaces ar the same 533 in the rules, but I found values with 472, should I set these values to 533?
Dieter
Bonn, germany
I have a LG AC that i would like to turn on and off with an arduino mega.
My original remote is in Sweden, here i have only a universal Remote that woks with my LG AC (tested).
I received these RAW Codes from my arduino with your sketch.
ON
Raw: (59) 8368, -4156, 552, -1528, 552, -476, 548, -484, 548, -516, 524, -1528, 552, -476, 548, -484, 552, -492, 552, -484, 552, -484, 552, -476, 548, -484, 552, -484, 548, -1528, 556, -472, 552, -492, 552, -484, 548, -480, 548, -1520, 548, -1528, 552, -484, 552, -476, 552, -1524, 552, -480, 548, -1524, 552, -484, 548, -508, 524, -1516, 552,
and for OFF
Raw: (59) 8340, -4192, 552, -1524, 556, -472, 556, -480, 520, -544, 492, -1560, 548, -480, 548, -484, 552, -484, 548, -1520, 528, -1552, 528, -508, 528, -508, 524, -504, 524, -512, 520, -524, 520, -516, 524, -512, 520, -504, 524, -512, 492, -552, 520, -508, 520, -1544, 524, -520, 516, -1556, 524, -508, 520, -516, 516, -516, 520, -1560, 516,
Now I would like to adjust my RAW codes to LG28AC Rules in analysir.
Marks and spaces ar the same 533 in the rules, but I found values with 472, should I set these values to 533?
Dieter
Bonn, germany