Create a Custom Protocol for Ducasa AC

Everything related to protocols and IR codes
ZoiloMora
Posts: 8
Joined: Sun Sep 19, 2021 12:08 pm
Location: Murcia, Spain

Re: Create a Custom Protocol for Ducasa AC

Post by ZoiloMora »

AnalysIR wrote:
Tue Sep 21, 2021 12:35 pm
If temperature is in Celsius it looks like the LSB bit of nibble5 and the top 3 bits of nibble6 with the result added to 15 to get the actual Celsius value.
I did not fully understand this part :?

You mean this?
Captura de pantalla 2021-09-21 a las 15.24.29.png
You do not have the required permissions to view the files attached to this post.

User avatar
AnalysIR
Site Admin
Posts: 705
Joined: Sat Aug 31, 2013 3:51 pm
Location: Dublin, Ireland
Contact:

Re: Create a Custom Protocol for Ducasa AC

Post by AnalysIR »

For 25 degC

Binary: 1001 =9

9+15=25
2021-09-21 14_44_22_ScreenShot.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
AnalysIR
Site Admin
Posts: 705
Joined: Sat Aug 31, 2013 3:51 pm
Location: Dublin, Ireland
Contact:

Re: Create a Custom Protocol for Ducasa AC

Post by AnalysIR »

FYI: usually I ssee this number added to 16DegC.
So make sure you are recording correctly. Set temp to 15 and then record when you press temp+.....etc
(Some of your numbers look 1 degC out based on the rule above.

ZoiloMora
Posts: 8
Joined: Sun Sep 19, 2021 12:08 pm
Location: Murcia, Spain

Re: Create a Custom Protocol for Ducasa AC

Post by ZoiloMora »

AnalysIR wrote:
Tue Sep 21, 2021 1:50 pm
FYI: usually I ssee this number added to 16DegC.
So make sure you are recording correctly. Set temp to 15 and then record when you press temp+.....etc
(Some of your numbers look 1 degC out based on the rule above.
That's exactly what I did.
I went down to the minimum temperature and then I was raising the temperature from 1 to 1.
Only the change in temperature is recorded. :?

Post Reply