Connecting the A.IR Shield ESP8266/ESP32 with AnalysIR over SerialUSB

User avatar
AnalysIR
Site Admin
Posts: 776
Joined: Sat Aug 31, 2013 3:51 pm
Location: Dublin, Ireland
Contact:

Re: Connecting the A.IR Shield ESP8266/ESP32 with AnalysIR over SerialUSB

Post by AnalysIR »

in device manager, right click on the comport->properties->Port settings.

then if the settings are there, set the BAUD rate to 115200.....a long shot?
User avatar
AnalysIR
Site Admin
Posts: 776
Joined: Sat Aug 31, 2013 3:51 pm
Location: Dublin, Ireland
Contact:

Re: Connecting the A.IR Shield ESP8266/ESP32 with AnalysIR over SerialUSB

Post by AnalysIR »

electrodevice wrote: Fri Apr 06, 2018 5:46 pm port is green only COM1 (free)
But you said it is not connected to COM1

You could also try uninstalling the com port driver and reinstalling it
Post Reply