IRForum

updated ini emailed to you....rgds

Yes, we will issue a new 'ini' file to cover this new protocol in a few days. Thanks for submitting the History session for it, which is a big help.

Thanks for posting the update & Glad you got it working

We have just published it on Github:

https://github.com/AnalysIR/LIR2RAW

Sure, I will email it to you. The format is described in the LearnIR user guide (via the help menu).

First thing to try is to point the remote IR LED directly at the LearnIR receiver from a distance of 1->2m (or 3->6 feet). Once you get rid of the RAW sinals, we can then look at other issue. Finally, You can connect the LearnIR directly to the AnalysIR app, to avoid relaying them via the LearnIR APP.

Sadly, there seems to be no useful info on this device online. There is a mention that they try to make it difficult to reproduce the signal. The only thing I can suggest is opening up and applying an oscilloscope or logic analyzer to see what the signal is like. Alternatively, you could try: https:...

First thoughts are that it may not be a modulated IR signal, like a TV or STB. For example it could be an IRDA device which is not the same a consumer IR. (Although IRDA is usually very short range) If you post the relevant makes & model #s, I will try to check them out. The 58 after the LIR: indica...

forgot to mention...also post the model # of the device(S) and the remote(s)

Email me a full set of codes in a saved session file (Menu->File->save session) Also, send 2 signals for each one immediately after to ensure we get any toggle bit. I will then look into it. (However, I will be travelling over the next feew days so may not reply until next week) Based on a quick loo...